Sometimes the graphics or audio from CDG Karaoke discs, or tracks imported as CDG files on the hard drive will play a combination of:
No audio or graphics
This is caused by the M-Audio card default Codec sampling rate. If it is at 22,050, you need... 0.00
NOTE: This comes directly from the Tech Support at Creative."If it is your intention to run any third party software through the EAX system, you must carry out the following procedure (for one time only)."
Open the EAX panel
Open the Speaker selection panel
Select any preset... 0.00
This is normally fixed by updating the firmware for your drive. You can find the Updates to Plextor drives at: http://www.plextor.com/english/support/support_downloads.html#firm
Here is a website that has links for different models of drives: http://www.cdrinfo.com/Sections/Firmware/Home.aspx 0.00
1. Make sure you have the latest Microstudio version by running it, and click the Help menu About (MTU PROGRAM NAME) to see what version you are running. If you don't have the latest version, read these instructions. If your download link is older than 12 months or the latest version is not... 0.00
If the drives show under the Tools Menu\Detect Drives, do the following:
Click the Duplicate Disc Tab.
Left click the Down arrow to the right side of the Reading and Writing Drive Fields.
Left click this same drive in the list at the very bottom, even... 0.00
IMPORTANT NOTE: The device 0:0:0 below may be different, depending on how the drive is attached to the computer. Also, the (04H 00H 02H 05H 2CH 00H) string may contain different numbers.
ERROR: Finish DAO Recording, Command Failed on Device 0:0:0. Unit Attention. (04H 00H 02H 05H 2CH 00H)
The CD-R drive doesn't support the CD+G format correctly. If this is the problem, you would need to replace the drive for it to work.
One other thing to try is a different brand of disc, as this disc could also have copy protection on it, that can also cause this. 0.00
This was a problem before Microstudio 2.605.Upgrade to Version 2.605 or later by clicking on your Personal Download Link in your MTU Store Account. If your download link is no longer visible, purchase the product upgrade from www.mtu.com. 0.00
Your computer is not sending data to the CD-R drive fast enough. Find what is slowing down your computer.
Run Windows Disc Defragmenter by going to the Start Menu\Programs\Accessories\System Tools\Disc Defragmenter.
Run all of the Windows updates by clicking here.
Run Spybot... 0.00
This bug occurs on the Duplicate Disc Tab in Microstudio 2.605- 3.004 versions. Please update to Version 4.00x or do the following. Click the down arrow next to Reading drive in any screen where it appears. Then click your Plextor or other working drive. Do this each time that you get this... 0.00
You are trying to save to a CD-Rom or CD-Recorder drive, which can't be done this way.On the Duplicate Disc, the Custom Assembly, and the Import Tracks tab, click the Select Folder button and select a folder on your hard drive, not your CD-Rom or CDR drive. 0.00
This message appears when writing a CDR disc in the Custom Assembly Tab when you click the Write CD or Test Write buttons. You have added a bad .cdg file to the project.SOLUTION #1: Be sure the project in the Open/Save project: field does NOT contain both .cdg karaoke files and .wav audio files.... 0.00
The Drive is going bad.Try a different USB port if it is an external drive. If this still doesn't work, then it could mean that the USB case is going bad or has gone bad. Try a new case to see if this fixes the problem, or try it on a different computer. If the drive is an Internal drive, then make... 0.00
This error will only occur under Microstudio or Hoster while trying to read the disc into the computer. This error is always tied to the actual CD that you are trying to read into the program. Try another disc, and it should work fine.
Make sure your disc does not have alot of scratches on it. ... 0.00
The Microstudio play window only appears on the primary (host) display, and does not allow me to postion it on the secondary (singer) display.
This Feature is no longer available in Microstudio. This was removed in Microstudio 2.613.
Microstudio will only allow using Single Display, to allow... 0.00
This is because you have Minimized the program. You must right click on the Program on the bar at the bottom, and then click on Maximize. This willt hen bring the program back up to its normal size and location. This is the only way to fix this. 0.00
I just received Microstudio 3.00 software and Plextor 760A external CDG burner and have successfully imported several of my karaoke songs into Microstudio. When I move a song from "My Songs" to "Play List" and click on "play," I get a black square for my karaoke screen, the time indicator counts... 0.00